Name: Lynxmotion HQuad500 Drone (Base Combo Kit)
SKU: 167385

HQuad500 Frame and mounting hardware
Includes brushless motors, speed controller and propellers
"Plug and play" for easy solder-less assembly
Requires flight controller, battery, charger and remote (TX/RX)

Verify your country's laws and regulations for Drone and Unmanned Aircrafts use. Registration of Unmanned Aircrafts is made mandatory in many countries and you are responsible to verify and to comply these regulations.

The Lynxmotion HQuad500 Drone (Base Combo Kit) is a 500mm quadcopter built using the new Lynxmotion M.E.S. (MultiRotor Erector Set) system. The design uses our new aluminum clamps along with 16mm carbon fiber tubes. This combination of parts allows the frame to be:

Incredibly rigid (minimal flexing)
Versatile (Integrated mounting for upgrades)
Lightweight (use of composites and Aluminum)
Modular (change the frame / use different length tubes)

We equipped the HQuad500 with a camera plate up front which is removable. Different plates will be available as well as a stabilized gimbal system. The flight controller mounting is located at the "dead center" of the frame with slots accommodating 30.5mm to 45mm mounting. The frame is compatible with the Lynxmotion Nano Drone/UAV Flight Controller (with GPS)(not included) with a section designed for the GPS antenna and access to the underside ports. There are integrated mounting plates for the ESCs which allow for easy access.

- HQuad500 (Base Combo Kit):
  - 1x Lynxmotion HQuad500 Drone Kit (Hardware Only)
    - All G10 (Fiberglass frame parts to build the HQuad500 frame)
    - Complete Hardware Bag
    - 8x Lynxmotion UAV - 16mm Aluminum Clamps (2 Pack)
    - 2x 9" Lynxmotion Velcro Cinch Strap (VCS-09)
    - 4x Lynxmotion 220mm Carbon Fiber Tubes (2 pack)
- 4x Brushless Rotor Motor 1000Kv 15A
- 4x Lynxmotion 12A Multirotor ESC 1A BEC (With Connectors)
- 1x 9" x 4.5" Black Multi-Rotor CCW Propeller Pair
- 1x 9" x 4.5" Black Multi-Rotor CW Propeller Pair
- 1x 9" x 4.5" Orange Multi-Rotor CCW Propeller Pair
- 1x 9" x 4.5" Orange Multi-Rotor CW Propeller Pair
- 1x Wiring Harness QuadCopter Power Distribution
- 1x UAV Wiring Harness for RC Receiver Cable

Requires (sold separately)

Flight Controller (Lynxmotion Nano Drone/UAV Flight Controller (with GPS))
Battery: 11.1V (3S), 20C (min) 2500mAh (min) ( UAV & Drone Power & Wiring )
5 channel (or more) remote control (UAV & Drone Remote Control)

PDF File

G10 plates / panels
Carbon fiber tubes
Aluminum brackets and standoffs
Motor to Motor: 500mm (492.29mm)
Propellers: 8" to 10"
Front Arm Angle: 150° (149.05°)
Assembled Weight: 383g (frame only)
Flight Controller Mount: Flat surface as well as 30.5mm to 45mm slots (direct compatible with the Nano)
Mounting holes on the lower frame for use with a Lynxmotion pan/tilt and/or gripper